Vinyl and Rubber Floor Mat Liquid Cleaning Solution Used to remove dust, grease, grime, shoe prints, and other contaminants from ESD floor mats to maintain the performance of the mats. Simple Application Does Not Require Additional Rinsing Wet surface and then scrub/mop with a lint free flat mop until dry. Silicone Free Contains no silicone…
“Any auxiliary grounds (water pipe, building frame, ground stake) present and used at the workstation must be bonded to the equipment ground.” A low resistance connector (such as metal wire) should be soldered or mechanically attached electrically connecting the building electrical system AC ground (Equipment Ground) to the Auxiliary Ground. ESD Handbook TR20.20 section 5.1.3…
Read more What is the proper procedure for connecting the ESD ground to the building ground?
Chino, CA — Desco’s Wescorp brand ESD Hi Temp Polyimide Tape is a low-charging tape that can be exposed to high temperature applications such as wave soldering. The polyimide film is 1.0 mil thick (0.001″ or 0.0254 mm), and will not leave a residue when removed. The tape generates less than 50V (at 73°F, 45…