Ionization must be used when: A process required insulator can be charged to more than 125 volts AND is within 1 inch (2.5cm) of a ESD sensitive item (TR20.20-2016 ESDA) or A process required insulator can be charged to more than 2000 volts AND is within 12 inch (30cm) of a ESD sensitive item (TR20.20-2016…
Mounting an ionizer in an electronics production area can be challenging. Ideally, an ionizer will meet the ESD Protected Area’s performance standards while not interfering with normal activity at the workstation. The ionizer should be pointed directly at the target area where ESD susceptible devices are located. The ionizer’s fan speed can be increased to…
Setting up a new ESD Protected Area (EPA) can be a little daunting, especially if you are unfamiliar or relatively new to the concept of ESD Control. It would be nice to have a blue print for establishing an EPA, but in truth there is no exact formula as everyone’s situation is different. However, there…
Read more How to Create a New ESD Protected Area (EPA) from Scratch
Insulators and Isolated Conductors Wrist straps and work surface mats are some of the most common devices used to remove static charges. Wrist straps drain charges from operators and a properly grounded mat will provide path-to-ground for for exposed ESD susceptible devices . However, what if the static charge in question is on something…
Read more How do you Neutralize a Static Charge on Something that Cannot be Grounded?