Static Electricity Misconceptions: Fake vs. Real ESD Wrist Straps & Proper Grounding Deep-Dive
A Conversation About ESD Control
Thomas Ricciardelli of SelecTech sits in on the PCB Talk podcast to discuss the challenges of protecting components from the dangers of static electricity. ESD Systems stocks SelecTech’s SelectTile ESD Flooring System. The system is designed to create an ESD floor without the need for adhesives, copper strips, underlayment or padding. Please contact us for…
How to Create a New ESD Protected Area (EPA) from Scratch
Setting up a new ESD Protected Area (EPA) can be a little daunting, especially if you are unfamiliar or relatively new to the concept of ESD Control. It would be nice to have a blue print for establishing an EPA, but in truth there is no exact formula as everyone’s situation is different. However, there…
Read more How to Create a New ESD Protected Area (EPA) from Scratch
How to Create an ESD Compliance Verification Plan
Each component in an ESD protected area (EPA) plays a vital part in the fight against electrostatic discharge (ESD). If just one component is not performing correctly, you could harm your ESD sensitive devices, potentially costing your company a lot of money. The problem with many ESD protective products is that you can’t always see…
There is No Need to Replace Your Entire Wristband
When elastic wristbands wear out and loose their elasticity, the band can easily be replaced. There is no need to replace the entire wristband, which saves money. Desco’s elastic replacement strip is easy to replace with no tools. Watch the video to learn more. See Desco’s elastic replacement strip.
Best Practices for Establishing an ESD Workstation
ESD worksurfaces are typically an integral part of the ESD workstation, particularly in areas where hand assembly occurs. The purpose of the ESD worksurface is two-fold: (1) To provide a surface with little to no charge on it. (2) To provide a surface that will remove ElectroStatic charges from conductors (including ESD Susceptible devices and…
Read more Best Practices for Establishing an ESD Workstation
Fundamental ESD Control Principles – Personnel Grounding
A fundamental principle of ESD control is to ground conductors including people at ESD protected workstations. Wrist straps are the first line of defense against ESD, the most common personnel grounding device used, and are required to be used if the operator is sitting. The wristband should be worn snug to the skin with its…
Read more Fundamental ESD Control Principles – Personnel Grounding
ESD Awareness Symbols Explained
There are three ESD Awareness Symbols defined in ANSI/ESD S8.1: ESD Susceptibility Symbol ESD Protective Symbol ESD Common Point Ground To view information about each symbol please click the link or image above. Desco provides downloadable symbol artwork at no charge: ESD Susceptibility Symbol ESD Protective Symbol ESD Common Point Ground Desco utilizes the proper […]
Remember the time when Steve Wozniak taught us about ESD?
In 1985 Apple produced a service video that explained the importance of ESD control when servicing an Apple II. Steve Wozniak, a co-founder of Apple computers, was featured in the 26 minute video explaining the handling of ESD susceptible devices. Other than the fact that ESD components are smaller and more sensitive than ever (see…
Read more Remember the time when Steve Wozniak taught us about ESD?
Online ESD Courses and Training from the ESDA
Education is the ESD Association’s first priority. By offering convenient training, the Association provides ESD professionals with the knowledge and tools needed to meet the challenges of ESD in their companies. Visit the ESDA’s Online Academy for information