The major advantage* of ESD shoes is that they do not require a tab to connect to the operator. Conductive additives are blended into the sole (inside to outside) of the ESD shoes and connects (through the sweat layer) to the operator’s feet. However, there are a number of other considerations to when selecting ESD…
Read more ESD Shoes Versus ESD Foot Grounders
Most people notice a difference in the ability to generate static electricity when the air gets dryer (the % RH decreases). As an example, walking across a carpet can yield a charge of 35kV at 10% RH [very dry air], but will drop significantly to 7.5kV at 55% RH. In an electronics manufacturing environment lower…
Read more Dry Air and ESD Control
A complete static control program must also deal with isolated conductors that cannot be grounded and insulating materials (e.g., most common plastics). If an insulator cannot be removed from the ESD Protected Area, substituted with an ESD protective version, or controlled with a topical antistat, ionization must be used. These insulators are often referred to…
Read more When Do You Need Ionization?
Lenovo Service posted a video on their youtube site called “Understanding Electrostatic Discharge (ESD) for Technicians.” We encourage you to take a look. The video is very informative and does a good job of covering the basics of ESD control when working with ESD susceptible devices or components. The basic practices of controlling ESD when…
Read more Watch the Lenovo Service Video on ESD